Nortel Networks 1000E Procedure Configuring voice gateway channels using LD, Req, Type VGW, Des

Page 328 of 488 Installing and configuring a Voice Gateway Media Card

Note: The voice gateway channels can also be configured using Element

Manager. To configure the voice gateway channels using Element

Manager, follow Procedure 77 on page 325.

Procedure 78

Configuring voice gateway channels using LD 14

1Log in to the CS 1000E.

a.Enter the command:

LOGI

System response:

PASS?

b.Enter the default password:

0000

2Access LD 14. Enter the command:

LD 14

3Enter responses shown in Table 39.

Table 39

LD 14 – Configure physical TNs (Part 1 of 2)

Prompt	Response	Description
REQ	NEW 24	Create 24 voice Media Gateway channels on an ITG-P Line card.
		Not supported on MG 1000E.
	NEW 32	Create 32 voice Media Gateway channels on a Media Card.
TYPE	VGW	Voice Gateway.
TN	l s c u	TN of the first Voice Gateway Media Card unit.
		See Table 40 on page 337 for TN assignments.
DES	aa.......a	Description for gateway channels.
		Identify the channels using the card’s TLAN IP address or MAC
		address.
XTRK	MC32	Media Card 32-port

553-3041-210 Standard 4.00 September 2007