Nortel Networks warranty Configuring the MG 1000E Bandwidth Management Zones

Configuring the CS 1000E Call Server Page 211 of 488

Configuring the MG 1000E Bandwidth Management Zones

Follow Procedure 52 for configuring bandwidth management zones.

Procedure 52

Configuring MG 1000E Bandwidth Management Zone

1Enter LD 117 and press <cr>.

2Enter NEW ZONE 0, to create a new zone with default parameters.

Note: LD 117 also includes DIS and ENL commands to disable or enable a zone. When you create a zone, its default state is enabled. See LD 117

– Bandwidth management zone commands on page 212.

3Print zone and bandwidth information using PRT INTRAZONE or PRT INTERZONE.

4Exit from LD 117 by entering the command: ****

Communication Server 1000E Installation and Configuration