Nortel Networks 1000E warranty Installing and configuring IP Phones Page 414

Installing and configuring IP Phones Page 414 of 488

Table 53

LD 11 – Configure an IP Phone. (Part 3 of 4)

Prompt Response Description

Key number limits that can be assigned are as follows:

0-7 for Meridian Communications Adapter (MCA)

0-5 for M2006

0-7 for M2008

0-59 for M2616, varies with number of add-on modules

0-79 for I2002, varies with value of KEM 0-79 for I2004, varies with value of KEM

Note: The first IP Phone KEM is assigned keys 32-55, and the second IP Phone KEM is assigned keys 56-79.

Type xx = NUL to remove a key function or feature for i2002 and i2004.

If either the Meridian Programmable Data Adapter (MPDA) or the Display Module is equipped, then key 7 on sets M2008, M2216, and M2616 sets and key 5 on set M2006 will become Program keys which cannot be used as function keys.

Any printout of the TN block will not show key 7 because it is a local function key.

On the M2616, if CLS = HFA, key 15 on the voice TN defaults to the Handsfree key. No other feature assignment is accepted.

Primary and secondary data DNs must be unique.

A station SCR, SCN, MCR, or MCN DN must be removed as a member from all Group Hunt lists before the DN can be modified.

Communication Server 1000E Installation and Configuration