Nortel Networks warranty Telnet CS 1000E COM port from a PC, Start Run

Connecting a Terminal Server Page 259 of 488

Telnet CS 1000E COM port from a PC

Connect port xx (xx = 1 - 19) of the Terminal Server to COM1 port of the CS 1000E Call Server.

Follow Procedure 65 to establish access to a Call Server from a PC through telnet Terminal Server. Use the same port number for each procedure step.

Procedure 65

Accessing a CS 1000E from a PC through telnet Terminal Server

1Disable IP TCP Keepalive Timer so that the telnet session is always on and LAN traffic is reduced. Enter:

DEFINE PORT xx IP TCP KEEPALIVE TIMER 0

Where: xx = 1-19

Note: Do not change the configuration for the default console (port 20).

2Specify the character to be transferred for <CR> in telnet. Enter: define port xx TELNET NEWLINE FILTERING CR

3Define the port baud rate to equal the baud rate of the CS 1000E COM port. Enter:

define port xx speed [BAUDRATE]

Where: xx = Port number from 1-19 and BAUDRATE = the baud rate of the connected Call Server COM port.

4Logout. Enter: logout port xx

5Check the configuration. Enter:

list port xx alternate chara list port xx telnet chara

6Run telnet on the PC.

a.In Windows:

Start > Run

Communication Server 1000E Installation and Configuration