Nortel Networks 1000E warranty 487

Configuring IP Peer Networking and managing the Gatekeeper database Page 487 of 488

5Configure the Gatekeeper database to provide a central database of addresses that are required to route calls across the network, using the Gatekeeper web pages in Element Manager.

aLog in to the Gatekeeper web pages in Element Manager.

bVerify that the Gatekeeper is the Primary Gatekeeper and is active.

cConfigure the System Wide Settings.

dCreate the CDP domains.

eAdd the RAS and non-RAS endpoints.

fAdd the endpoint prefixes.

gAdd the Numbering Plan entries for each endpoint, including the Cost Factor for each entry.

hAdd the default routes.

iAdd the Gatekeeper zones (if required).

jTest the Numbering Plans.

kPerform database cutover.

lPerform the following operations, as necessary:

i.Take the Gatekeeper out-of-service.

ii.Perform database cutover.

iii.Perform database rollback.

iv.View traffic reports.

mLog out of the Gatekeeper web pages in Element Manager.

Communication Server 1000E Installation and Configuration