Nortel Networks 1000E warranty Enabling a card unit

Page 350 of 488 Installing and configuring a Voice Gateway Media Card

The output from this command is shown in the text box in the lower half of the web page.

End of Procedure

Enabling a card unit

Follow Procedure 88 to enable a Voice Gateway Media Card unit using

Element Manager.

Procedure 88

Enabling a Voice Gateway Media Card unit using Element Manager

1Select System > Maintenance from the navigator.

The Maintenance web page opens as shown in Figure 119 on page 344. This page allows you to perform maintenance using overlays or using a selected functionality. The default is overlay, as shown in Figure 119.

2Select Select by Functionality.

The list in the web page changes to show a list of diagnostics you can use, as shown in Figure 120 on page 345.

3Select Network & Peripheral Equipment Diagnostics from the list in Figure 120 on page 345.

The Network and Peripheral Diagnostics web page opens, as shown in Figure 121 on page 346.

4Select the ENLU – Enable unit command from the Unit Commands drop-down list.

5Enter the card number and unit number in the corresponding Command Parameter text box.

6Click Submit to the right of the text box.

The output from this command is shown in the text box in the lower half of the web page.

End of Procedure

553-3041-210 Standard 4.00 September 2007