Nortel Networks 1000E warranty Enabling a card

Installing and configuring a Voice Gateway Media Card Page 349 of 488

The Network and Peripheral Diagnostics web page opens, as shown in

Figure 121 on page 346.

4Select the DISU – Disable unit command from the Unit Commands drop-down list.

5Enter the card number and unit number in the corresponding Command Parameter text box.

6Click Submit to the right of the text box.

The output from this command is shown in the text box in the lower half of the web page.

End of Procedure

Enabling a card

Follow Procedure 87 to enable a Voice Gateway Media Card using

Element Manager.

Procedure 87

Enabling a Voice Gateway Media Card using Element Manager

1Select System > Maintenance from the navigator.

The Maintenance web page opens as shown in Figure 119 on page 344. This page allows you to perform maintenance using overlays or using a selected functionality. The default is overlay, as shown in Figure 119.

2Select Select by Functionality.

The list in the web page changes to show a list of diagnostics you can use, as shown in Figure 120 on page 345.

3Select Network & Peripheral Equipment Diagnostics from the list in Figure 120 on page 345.

The Network and Peripheral Diagnostics web page opens, as shown in Figure 121 on page 346.

4Select the ENLC – Enable and reset card command from the Card Commands drop-down list.

5Enter the card number in the corresponding Command Parameter text box.

6Click Submit to the right of the text box.

Communication Server 1000E Installation and Configuration