Nortel Networks 1000E warranty Keycodes, Keycode rejection

Page 244 of 488 Installing software on an MG 1000T Small System Controller

Keycodes

A security keycode system protects the installation of software, feature set, and license parameters. The keycodes required for a new installation or system upgrade are on the Keycode Data Sheet that is supplied with the software and security device.

A different keycode is assigned to each site for a particular combination of items such as software release, feature set, and LICENSES. The installation does not continue unless correct keycodes are entered.

Note: If an invalid keycode is entered, the software and databases on the present system are not affected.

Note: Contact your support group if the Keycode Data Sheet is missing.

Keycode rejection

The Software Installation Program validates the keycodes. If the keycodes are valid then the installation continues. If the system rejects the keycodes, then ensure that the:

•correct keycodes have been entered

•software is the correct version for the site

•feature set data has been entered correctly

•License parameter data has been entered correctly

If the correct data has been entered and the keycodes are rejected, then stop the installation and call the support group.

IMPORTANT!

The system limits the validation of keycodes to three consecutive attempts. If the third consecutive attempt is unsuccessful, then the Software Installation Program returns to the main menu. Any data entered during this session is lost.

553-3041-210 Standard 4.00 September 2007