Nortel Networks 1000E warranty Logging in to the Signaling Server, Quit

Installing and configuring the Signaling Server software Page 195 of 488

Figure 75

Quit

CS 1000 Signaling Server Software Install Tool (sse-x.xx.xx)

=====================================================================

You have selected to quit the Install Tool.

Before quitting and rebooting the system, remove all disks (floppy, CDROM) from the drives.

Please enter:

<CR> -> <m> - Return to previous menu. <q> - Quit and reboot the system.

Enter Choice> q

18Remove the CD-ROM from the drive and reboot the system.

Note: After software installation and reboot, a Follower Signaling Server sends out BOOTP requests and waits for a response. Since the Follower Signaling Server is not yet configured in an IP Telephony node, there is no BOOTP response. For more information see Signaling Server:

Installation and Configuration (553-3001-212).

End of Procedure

Use Element Manager to install the Follower Signaling Server in the

IP Telephony node.

Logging in to the Signaling Server

Use Procedure 45 on page 196 to log in to the vxWorksTM shell to access the Signaling Server from a maintenance terminal.

Communication Server 1000E Installation and Configuration