Nortel Networks 1000E Setting the system time and date, Procedure Setting system time and date

Page 250 of 488 Installing software on an MG 1000T Small System Controller

***WARNING *** A system restart will be invoked as part of the software installation process

Are you sure you wish to perform the installation? (y/n/[a]bort): _

13Perform the installation.

a.Enter: y

System response (if software installation successful):

Installation completed successfully.

b.The system then reboots.

Rebooting...

Once the installation program completes, messages appear on the terminal screen. When the message “INIXXX” appears, the system is operational.

End of Procedure

Setting the system time and date

Follow Procedure 61 to set the system time and date. You can also use

Element Manager or OTM.

Procedure 61

Setting system time and date

1Log in to the CS 1000E.

a.Enter the command:

LOGI

System response:

PASS?

b.Enter the default password:

0000

2Access LD 2. Enter the command:

LD 2

553-3041-210 Standard 4.00 September 2007