Nortel Networks 1000E warranty Saving configuration changes, Maxu, Iptn YES, Zone, Cust

Installing and configuring a Voice Gateway Media Card Page 329 of 488

Table 39

LD 14 – Configure physical TNs (Part 2 of 2)

Prompt	Response	Description
MAXU	32	32 is the maximum number of voice Media Gateway channels on
		the Media Card.
	24	For MG 1000T when XTRK = ITG2
		24 is the maximum number of voice Media Gateway channels on
		the ITG-P Line card.
IPTN	YES	ITG Physical TN.
ZONE	0-255	MG 1000T Zone number to which the Voice Gateway Media Card
		Physical TNs belong.
		Verify that the zone exists in LD 117.
		The ZONE prompt is not available when configuring VGW in an
		MG 1000E. The VGWs are assigned the same zone as the
		MG 1000E.
		Note: If the Zone of an MG 1000E is changed, all VGW in the
		MG 1000E must be removed and reconfigured to assume the
		new Zone of the MG 1000E.
CUST	xx	The customer to which the IPTN resources are assigned.
		Note: This means that for multi-customer CS 1000E systems,
		each customer must have a dedicated IP Telephony node for
		IP Phones.

4Exit from LD 14. Enter the command:

****

End of Procedure

Saving configuration changes

Perform a datadump to save configuration changes. Complete the steps in Procedure 97: "Performing a datadump using Element Manager" on page 380.

Communication Server 1000E Installation and Configuration