Nortel Networks 1000E warranty Transfer / Status web

Page 378 of 488 Configuring an IP telephony node

Figure 137

Transfer / Status web page

The previous status of the node displays, and the failure reason is displayed for elements in nodes that failed to get configuration files (BOOTP.TAB and CONFIG.INI) from the CS 1000E.

The Transfer / Status web page has five buttons:

•Selected All. Selects all the elements in the node (that is, it adds a check mark in each element’s check box).

•Unselect All. Unselects all the elements in the node (that is, it removes the check marks for all the selected elements).

•Transfer to Selected Elements. Re-transfers node configuration files only to selected elements, regardless of a “Transfer Failed” state.

•Transfer to Failed Elements. Transfers only node configuration files to elements in a “Transfer Failed” state. The Transfer to Failed Elements button is displayed only when at least one element on the Node failed to transfer either a BOOTP.TAB or CONFIG.INI in the previous operation.

553-3041-210 Standard 4.00 September 2007