Nortel Networks 1000E warranty Installing the IP Softphone 2050 application

Installing and configuring IP Phones Page 437 of 488

installed, you can still choose it as the audio device from the Configuration Utility.

Procedure 112

Installing the USB Headset Kit

1Connect the coiled lower cord to the headset cord with the Quick Disconnect connector. Ensure the Quick Disconnect is securely fastened.

2Connect the headset cord to the RJ9 jack on the adaptor.

3Connect the USB cable to the headset adaptor and to one of the USB jacks at the back of your PC or USB hub.

End of Procedure

The first time the headset adapter is plugged in, there is a delay while Windows ® configures the device and locates appropriate driver software. During the installation you can be prompted to supply the original Windows CD-ROM so that Windows can locate the required drivers.

Installing the IP Softphone 2050 application

Procedure 113

Installing the IP Softphone 2050 on your PC

1Insert the CD-ROM disk into the CD-ROM drive of your PC.

Note: Installation should proceed automatically. If it does not, then continue with step 1. Otherwise go directly to step 5.

2On the PC desktop, double-click the My Computer icon.

3Double-click the CD icon.

4Double-click the Setup icon.

5Follow the prompts that appear on the screen.

6Run the IP Softphone 2050 Configuration Utility to assign a server address, select sound devices, and select a server type.

End of Procedure

Communication Server 1000E Installation and Configuration