Nortel Networks 1000E warranty Configuring a card, Adding a card to an IP telephony node

Installing and configuring a Voice Gateway Media Card Page 321 of 488

•Procedure 83: "Displaying the status of Voice Gateway Media Card units" on page 344

•Procedure 84: "Displaying the status of one unit on a Voice Gateway Media Card" on page 347

•Procedure 85: "Disabling a Voice Gateway Media Card using Element Manager" on page 347

•Procedure 86: "Disabling a Voice Gateway Media Card unit using Element Manager" on page 348

•Procedure 87: "Enabling a Voice Gateway Media Card using Element Manager" on page 349

•Procedure 88: "Enabling a Voice Gateway Media Card unit using Element Manager" on page 350

Configuring a card

A Voice Gateway Media Card requires configuration of:

•the IP telephony properties defined with Element Manager (the Voice Gateway Media Cards are assigned to an IP telephony node). See “Configuring an IP telephony node” on page 365.

•the voice gateway channels defined on the CS 1000E. See “Configuring voice gateway channels using Element Manager” on page 325.

Adding a card to an IP telephony node

The Voice Gateway Media Card is added to an IP telephony node using Element Manager only. See Element Manager: System Administration (553-3001-332) for details.

Procedure 76

Adding a Voice Gateway Media Card to an IP telephony node

1Log in to Element Manager.

2Select IP Telephony > Nodes: Servers, Media Cards > Configuration from the navigator.

The Node Configuration web page opens, as shown in Figure 99.

Communication Server 1000E Installation and Configuration