Installing and configuring the Signaling Server software

Page 171 of 488

 

 

a.Click Software Downloads in the Support & Training menu. The Technical Support page appears.

b.Click Product Families. The Products Families list appears.

c.Click Succession. The By Product Family page opens.

d.Under the Succession Enterprise > Signaling Server and IP Peer Networking headings, click Software.

3Download the Signaling Server CD image.

a.Click on the link for the appropriate Signaling Server CD image.

The CD-ROM image includes the Signaling Server software as well as IP Phone firmware and Voice Gateway Media Card loadware.

b.If not logged in to a My Nortel account, click on Log In to sign in.

Note: If you are not registered to access this web site, refer to the CS 1000 product bulletin for directions on how to register.

c.The Software: Software Details Information page appears. Click the link next to File Download.

d.In the Save As window, choose the desired path to save the file to the local disk on your PC and click Save.

End of Procedure

Procedure 43

Creating a Signaling Server Software CD-ROM

1Use the software option to “burn” or “create” a CD from the CD image. Do not drag-and-drop, as this can result in a file copy and a CD-ROM that does not work. Do not write the ISO file to the CD-ROM.

Note: Select the disk-at-once write option.

2Close the session.

3Label the CD appropriately, for example, Signaling Server, sse-x.xx.xx.

End of Procedure

The Software CD-ROM must be readable in a standard CD-ROM drive. After you create a CD from the CD image, the CD contains several directories and

Communication Server 1000E Installation and Configuration

Page 171
Image 171
Nortel Networks 1000E warranty End of Procedure Creating a Signaling Server Software CD-ROM