Nortel Networks 1000E warranty Setting the TTY terminal port, Traditional terminal SDI connection

Page 268 of 488 Configuring a terminal and SDI ports

Setting the TTY terminal port

A TTY terminal can be any standard PC running terminal software, (for example, HyperTerminal). The TTY terminal port must be configured as:

•Bits per second - Baud rate must be the same as the speed of SDI port.

•Data bits - 8

•Parity- None

•Stop bit – 1

•Flow control – None

•Terminal Emulation- VT100

Traditional terminal SDI connection

Figure 87 shows the setup values for a traditional terminal setup.

553-3041-210 Standard 4.00 September 2007