Panasonic SV-AV30U manual Erasing the Files Recorded on a Memory Card l

≥The White Balance may not be adjusted in dark places.

≥Adjustment of White Balance is effective under the following conditions.

-When recording under reddish lighting (halogen light bulb, incandescent light bulb, etc.).

-When recording a picture of mono-tone color.

-When recording under multiple light sources.

ªErasing the Files Recorded on a

Memory Card (l 29)

≥Erased files cannot be restored.

≥This SD Multi AV Device cannot erase any music files (MP3 and MPEG2-AAC).

≥The files recorded in the Voice Record mode are automatically locked. Release the lock to erase them.

≥Do not erase the Voice files recorded with this SD Multi AV Device using other devices.

≥A locked file cannot be erased. Release the lock to erase them.

≥No files can be erased if the write protect switch on the SD Memory Card is set to [LOCK].

≥If a file is erased on the SD Multi AV Device, the DPOF information set by

another camera may also be erased. ≥A still picture file (other than JPEG) that

cannot be played back on the SD Multi AV Device may be erased.

≥Erasing many files may take a little time. Wait until the Card Access Lamp goes out.

≥Recorded voice data always has serial numbers even after an arbitrary file is deleted. For example, if [100]TRACK003 is deleted, the current [100]TRACK004 will change into [100]TRACK003 and the files that follow will also change accordingly.

≥Do not turn the power off or remove the Memory Card while a file is being deleted. Otherwise, the Memory Card may be damaged.

≥Delete audio (VOICE) files on the SD Multi AV Device.

ªProtecting files (File Protection)

(l 30)

≥Even if files are locked, the files will be deleted when the Memory Card is formatted.

≥Any music files (MPEG2-AAC and MP3) cannot be locked or unlocked.

≥Files recorded by Voice Recording Functions are automatically locked (to prevent accidental erasure).

≥The File Protection carried out by this SD Multi AV Device is only effective for this SD Multi AV Device.

≥The SD Memory Card has a write protection switch on it. If the switch is moved to the [LOCK] side, you cannot write to or format the Memory Card. If it is moved back, you can.

≥Locking/Unlocking many files may take a little time. Wait until the Card Access Lamp goes out.

ªWriting Printing Data on a Memory Card (DPOF Setting)

(l 31)

≥DPOF is the abbreviation of Digital Print Order Format. DPOF is used to select images you want to print. DPOF can only be used with products that support this feature.

≥The number of prints can be set from 0 to 99.

≥This SD Multi AV Device may not recognize the DPOF set by another type of device.

≥DPOF-setting many files may take a little time. Wait until the Card Access Lamp goes out.

60