≥Electrical noise, static electricity or failure of the SD Multi AV Device or the Memory Card may damage the Memory Card or erase the data stored on the Memory Card. It is recommended to save important data onto a personal computer.
≥Some cards may pop out when they are removed.
ªUsing the LCD Monitor (l 12)
≥Forcefully rotating the LCD Monitor beyond ranges described in these operating instructions will damage the SD Multi AV Device.
≥Do not carry or store the SD Multi AV Device with the LCD Monitor facing upward. Otherwise, the LCD Monitor may be damaged.
≥When the LCD Monitor is closed with its display section facing outward, operation with the
≥The LCD Monitor may
appear on the video to be recorded at some monitor set angles. Even if the LCD Monitor may not be viewed through the lens, it may appear if the video
is viewed on a personal computer or if it is printed.
ªUsing the Remote Controller/
Earphones (l 12)
≥Use the earphones supplied or one with a cord of 10 ft. (3 m) or less.
≥The earphones can be attached to the main unit directly without using the remote controller.
≥If the earphones/remote controller are attached, the sound will not be output from the speaker.
≥When the SD Multi AV Device is not turned [OFF] (is in the standby mode), press the [ ■ /1● ] button on the remote controller to activate it.
≥The equalizer [EQ] is operational only when playing back music files.
ªTurning the Power On/Selecting
Operation Modes (l 13)
≥If the SD Multi AV Device is not used for 10 minutes or longer, the power is automatically turned off. Set the Power/ Mode Switch to [OFF] and turn it back on.
ªUsing the Menu Screen (l 14)
≥To abort the setting, press the [MENU] Button.
≥While a Menu is displayed, you cannot record or play back.
≥The menu screen does not appear during recording.
ªSetting Date and Time (l 17)
≥The
≥The clock might cause a deviation from the correct date and/or time, so be sure to check the current date and/or time before recording.
≥If the [PRESS MENU TO SET CLOCK] indicator is displayed, set the date and time after the battery has charged. (l 49)
ªSetting the Power Supply
Frequency (l 18)
≥This setting may not completely suppress the horizontal stripes.
≥If this mode is used for outdoor recording, the entire image on the screen (or recording images) may be tinged with white.
≥This mode cannot be set or released while recording.
56
