Setting the Power Supply Frequency
Set the power supply frequency before using the SD | 1 |
Multi AV Device. The power supply frequency is |
|
different depending on the country or region. | 2 |
Adjustment of the frequency will help reduce the |
appearance of horizontal stripes consisting of light
and dark patterns under fluorescent lighting. | 3 |
|
1Set the Power/Mode Switch to [REC]. (l 13)
2Press the [MENU] Button.
3Select [INITIAL SETUP] and press the [1 SET] Button.
4Set [AC MAINS] to [50Hz] or [60Hz].
ªTo Reduce the Appearance of |
|
Horizontal Stripes Consisting of Light | 4 |
and Dark Patterns |
If adjustment of the frequency does not have much effect on reducing horizontal stripes, operate the SD Multi AV Device as follows. (for MPEG4 mode and PICTURE mode)
1Set the Power/Mode Switch to [REC]. (l 13)
2Press [
] for approx. 1 second.
≥The [ 
] Indication appears when the horizontal stripes reduction function is activated.
OFF PLAY REC
MENU
SETUP MENU |
|
|
QUALITY | FINE |
|
FLASH | OFF |
|
BEEP SOUND | OFF |
|
INITIAL SETUP |
|
|
DISPLAY SETUP |
|
|
RETURN | MENU | EXIT |
INITIAL SETUP |
|
|
AC MAINS | 60Hz |
|
CLOCK SET |
|
|
CARD FORMAT |
|
|
RETURN | MENU | EXIT |
To Release this mode
Press [ 
] again.
≥Turning the power off will release this mode.
1 OFF PLAY REC
2
18
