Others, After Use | Panasonic SV-AV30U guide

Others

Charge the built-in battery for maintaining the date information

This built-in battery is used for the memory of date and time. If [PRESS MENU TO SET CLOCK] is displayed when the power is on, the built-in battery 1 may be exhausted. Charge using the following procedure:

1 Take the battery out and plug in the AC adaptor. (l 10)

2Turn the power off and leave the SD Multi AV Device as it is for approx. 12 hours.

≥After recharging the built-in battery, adjust the date	2
and time. (l 17)

≥Even if the built-in battery is not run down, [PRESS MENU TO SET CLOCK] is displayed at the time of purchase.

After Use

1Turn off the SD Multi AV Device.

2Take out the Memory Card. (l 11)

3Detach the power supply and retract the LCD Monitor.

4Put the SD Multi AV Device into the Wearable Carry Case.

DC IN 4.8V

OFF PLAY REC

Page 49

Image 49

Panasonic SV-AV30U manual Others, After Use

Contents

Model No. SV-AV30U End User License Agreement Contents Others Information for Your SafetyDear Customer While SV-AV30U FCC Note U.S. only Power supply frequency Clock settingIntroduction Optional Accessory Standard Accessories Menu Button Menu l Multi-function Button Controls and ComponentsOperating/Select Function SET l 14, 21, 23, 25 Release Button PUSH1 l DC Input Socket DC in 4.8V l Wait until Power Lamp 1 goes off Charging the Battery Removing the Memory Card Inserting a Memory Card Using the Remote Controller Earphones Using the LCD MonitorOperating the Remote Controller Files. l REC mode Set the Power/Mode Switch to Play or RECPlay mode About the Operation Modes Select a desired mode. l Press the Menu Button Using the Menu ScreenPress the UP/DOWN side of the Multi Sub-Menu for REC Mode REC ModeDisplay setup Display Setup Display Display List of Menus Sub-Menu for Play Mode Play Mode Return Setting Date and Time Set the Power/Mode Switch to REC. l Press for approx second Setting the Power Supply FrequencyTo Release this mode Dark patterns under fluorescent lighting LCD Brightness Brightness Adjusting Brightness and Color Level on the LCD MonitorLCD Color Level Color Press the 1 SET Button Operation during Playback Playing back Still PicturesTo Play Back All of the Still Pictures One by One While playing back, press the 1 SET Button To Double the Image Size Recording Moving Pictures MPEG4Press the Recording Start/Stop Button Press 2k for approx second ªOperation during Playback Playing Back Moving Pictures MPEG4ªFor Repeat Playback ªTo Change the Display Size Speak into the built-in microphone 1 This SD Multi AV Device Recording Voice Voice Recording Function Hearing the Voice Recorded Voice Playback Operation during playing Listening to Music Music PlaybackªTo Repeat Playback Set Repeat to 1MUSIC or ALL ªSelecting a Playlist Adjusting the VolumeSelecting a desired Sound Quality Press s or r of the VOL Button Backlight Compensation Function Adjusting White Balance To Erase All Files Erasing the Files Recorded on a Memory CardSelect YES and press the 1 SET Button To Release the File Protection Protecting files File ProtectionTo Lock All Files Select Unlock in above To Release All the Dpof Settings Writing Printing Data on a Memory Card Dpof SettingTo Check the Dpof Settings in Slide Show Creating P.Slide Show Data with SD- MovieStage Ver.2.0 Playing back still pictures one by one P.Slide Show Select YES and press the 1 SET Button to be formatted Formatting the Memory Card Using the AV Cradle Fitting on the AV Cradle Playing Back on an external device Useful Connection AV Cradle always connected Sample 2 example when The SD Multi AV Device is not usedSample Details of the connection Recording pictures supplied from an external device REC Timer About the supplied software About the supplied software System Requirements for USB Driver USB Driver SD-MovieStage Features of SD-MovieStage Ver.2.0System Requirements for SD-MovieStage Ver.2.0 Display SD-Jukebox Features of SD-Jukebox Ver.3.0System Requirements for SD-Jukebox Ver.3.0 SoundPage Click SD-Jukebox Ver.3.0 Installing SD-Jukebox Ver.3.02 ≥Connect the USB cable after the USB driver is installed Connecting with the PCStarting the Software Starting the SD-MovieStage Ver.2.0 If you no longer need software Uninstall Disconnecting the USB Cable safelyDouble click the in task tray Select USB Mass Storage Device and click Stop Click OK Constructing a Folder when the Memory Card is used with a PC After Use Others Indications Card Full Repeat Playback l 23 Thoroughly with a soft dry cloth Battery Characteristics Optimal Use of the BatteryAbout the Lens About the AC Adaptor Write-Protect Switch Power Supply l State of Power Lamp while ChargingInserting a Memory Card l Using the Remote Controller Earphones l Using the LCD Monitor lTurning the Power On/Selecting Operation Modes l Using the Menu Screen l Playing back Still Pictures l Recording Still Pictures lRecording Moving Pictures MPEG4 l Recording Voice Voice Recording Function l Playing Back Moving Pictures MPEG4 l Adjusting White Balance l Adjusting the Volume lHearing the Voice Recorded Voice Playback l Listening to Music Music Playback l Erasing the Files Recorded on a Memory Card l Writing Printing Data on a Memory Card Dpof SettingProtecting files File Protection Formatting the Memory Card Playing back still pictures one by One P.Slide Show lFitting on the AV Cradle l Playing Back on an external Device l Connecting with the PC l Using Auto Recording FunctionRecording pictures supplied from An external device l Useful Connection AV Cradle Always connected l 3Insert the supplied CD-ROM into the CD-ROM drive 1Click Next5Click Next 6Click Next 7Click Finish Before Requesting Service Even if a Memory Card is formatted It cannot be used During Playback an k Indication is DisplayedSound is not heard while a still picture is played back Is connected with a TV Removal warning appears SD Multi AV Device Panasonic SV-AV30U Specifications Limited Warranty Limited Warranty For U.S.A. OnlyLimited Warranty Coverage Carry-In or Mail-In Service Limited Warranty Limits And Exclusions Product Repairs Customer Services Directory For U.S.A. Only Utilización Adaptador CA Alimentación eléctricaCarga de la batería Encendido/Selección modos de funcionamiento Inserción de la Tarjeta de memoriaInformaciones sobre el modo de Funcionamiento Poner el botón de encendido/selector Modo en Play o REC Poner el botón de encendido/selector Grabación de imágenes estáticas/imágenes dinámicas/la vozModo en REC Pulsar el botón de grabación Start/Stop Panasonic Canada Inc