ªRecording pictures supplied from
an external device (l 38)
≥Pictures containing the
≥The power is automatically turned off in approx. 10 minutes after the SD Multi AV Device stops. Turn the power ON again.
≥VOICE from an external device cannot be recorded.
≥In the [REC] mode, video or audio is not output from the [AV OUT] terminal, irrespective of the setting of the AV Output
Control Switch.
≥A
≥For audio, the signals from the L (left) channel and the R (right) channel for stereo are mixed for recording in monaural.
≥Do not plug in or pull out the video or audio cord during recording. The recording may not be performed correctly.
≥For pictures containing both the main audio and sub audio, select either channel before recording. Otherwise, you will not be able to select either of the main audio or sub audio. (Both audio channels are mixed for recording.)
≥If pictures are recorded when TV broadcasting signals are weak or pictures are affected by noise, they may be distorted or may not even be played back.
ªUseful Connection (AV Cradle
always connected) (l 37)
≥When connecting, turn the power [OFF]. ≥Do not connect the SD Multi AV Device
simultaneously to the AV input socket and AV output socket of one single device. Otherwise, the display will be distorted.
ªUsing Auto Recording Function
(l 39)
≥Do not turn the power switch to [OFF] or [PLAY] in the standby mode.
≥When connecting, turn the power of the external devices off.
≥Automatic recording can be set only once. ≥When the Memory Card is full of data,
recording automatically stops even if the time set has not been reached.
≥The initial part of the picture may not be recorded.
≥The recording timer does not work except for automatic recording.
≥Allow about 1 minute for timer setting, etc. on the external devices.
≥Do not plug in or pull out the AV Cable while recording. Otherwise, the recording may not be completed properly.
ªConnecting with the PC (l 46)
≥To erase pictures that you recorded on the Memory Card by using the SD Multi AV Device, be sure to erase them on the SD Multi AV Device or by the
≥You may not be able to properly play back on the SD Multi AV Device after editing the recorded data or changing the image data on a personal computer.
≥Moving Picture format (MPEG4) that can be played back on the SD Multi AV Device is ASF. (Depending on the file, it may not be able to be played back even if it is in ASF format.)
≥When you operate the SD Multi AV Device using its buttons, pull out the USB cable. (The SD Multi AV Device cannot be operated in the [PC ACCESSING] mode.)
≥Use only the supplied USB cable.
≥Do not remove the AC adaptor when the SD Multi AV Device is connected to the personal computer.
≥If the SD Multi AV Device’s personal computer peripheral mode
([PC ACCESSING] is displayed) is not cancelled when the personal computer is turned OFF, remove the USB cable.
62
