1
2 Connect the DC Input Lead to the [DC IN 4.8V] socket on the SD Multi AV Device.
ªCharging the Battery
1 | While holding the [ | ] part, slide | 1 |
| it to remove the Battery Compartment | ||
2 | Cover. |
|
|
Press the terminals of the battery onto |
| ||
| the terminals of the Battery |
|
|
| Compartment and set the battery. | 2 | |
| ≥Fit the battery with its label facing upward. | ||
3 | ≥After the battery is set, close the cover. |
| |
Connect the AC Adaptor to AC Main |
| ||
4 | socket. |
|
|
Connect the DC Input Lead to the [DC IN |
| ||
| 4.8V] socket on the SD Multi AV Device. |
| |
| ≥Power Lamp 1 flashes, and Charging starts. |
| |
| ≥When recharging, turn the power of the SD Multi |
| |
5 | AV Device off. |
|
|
Wait until Power Lamp 1 goes off. |
| ||
≥When recharging is completed, Power Lamp goes off.
≥If the Power Lamp flashes quickly (or slowly) when recharging, recharging is not normal. (l 55)
3
10
DC IN 4.8V 
DC IN 4.8V 
2
1
4
