Pioneer DVR-920H Tuner settings, Remote Control Mode, AV Link, Setup Navigator

The Initial Setup menu 14

Remote Control Mode

• Default setting: Recorder1

You only need to set this if you are using more than one Pioneer DVD recorder in the same room.

Initial Setup
Basic	Clock Setting	Recorder1
Tuner	Input Line System	Recorder2
Video In/Out	On Screen Display	Recorder3
Audio In	Front Panel Display
Audio Out	Power Save
Language	Remote Control Mode
Recording	AV Link
Playback	Setup Navigator

So that each remote control operates only its own recorder, make this setting different for each recorder and remote in the room.

There are three different recorder IDs. When set to Recorder2 or Recorder3, the remote control mode is shown in the front panel display.

After selecting a new recorder ID, you have to confirm the

change by selecting Yes or No (use the (cursor left/right) buttons), then pressing ENTER.

Note that as soon as you change the recorder ID, the remote becomes inoperative until you change the remote to the same ID.

To set the remote, press and hold RETURN and a number button (1, 2 or 3) until the indicator on the remote lights.

AV Link

•Default setting: This Recorder Only

Initial Setup
Basic	Clock Setting	This Recorder Only
Tuner	Input Line System	Pass Through
Video In/Out	On Screen Display
Audio In	Front Panel Display
Audio Out	Power Save
Language	Remote Control Mode
Recording	AV Link
Playback	Setup Navigator

This setting determines how AV Link signals are handled when the recorder is in standby. Choose the This Recorder Only setting for AV Link signals to affect only this recorder. Choose Pass Through to have this recorder pass on AV Link signals to other connected devices without affecting this recorder.

Setup Navigator

• Default setting: n/a

Initial Setup
Basic	Clock Setting	Start
Tuner	Input Line System
Video In/Out	On Screen Display
Audio In	Front Panel Display
Audio Out	Power Save
Language	Remote Control Mode
Recording	AV Link
Playback	Setup Navigator

The Setup Navigator appears automatically when you switch on the recorder for the first time (or after resetting the recorder). It is also available from the Initial Settings menu should you need it at any other time.

See also Switching on and setting up on page 26.

Tuner settings

Auto Channel Setting : Auto Scan

This recorder has a built-in TV tuner for recording PAL B/ G, PAL I, SECAM L and SECAM D/K TV programs off the air or from analog cable TV. We recommend that you first use the Auto Channel Setting described here to tune into the channels in your area, then if there are any unwanted channels, you can disable them using Channel Skip (described below). You can also fine-tune individual stations using the Manual CH Setting feature. See Manual CH Setting below for how to use this.

1Choose ‘Tuner’ from the Initial Setup menu, then ‘Auto Channel Setting’, then ‘Auto Scan’.

Initial Setup
Basic	Auto Channel Setting	Auto Scan
Tuner	Manual CH Setting	Download from TV
Video In/Out	Channel Swapping
Audio In
Audio Out
Language
Recording
Playback

2Select your country then press ENTER to start tuning.

Initial Setup
Basic	AuttoChannelAutolSettiChannelg Setting
Tuner	Manual CH Setting	UK
Video In/Out	Country
	Channel Swapping
Audio In
Audio Out
Language
Recording
Playback

•You can cancel before auto tuning has finished by pressing ENTER again.

English

109

En