Pioneer DVR-920H Getting started Chapter, Switching on and setting up, Enter

04Getting started

Chapter 4

Getting started

Switching on and setting up

When you switch the recorder on for the first time, you can make several basic settings using the Setup Navigator feature. This takes you through setting the clock, the internal TV tuner and the video and audio output settings.

If you’re using the recorder for the first time, we strongly recommend you use the Setup Navigator before starting to use the recorder.

STANDBY/ON

ENTER

DVD RECORDER

26

1Switch on your TV and set the video input to this recorder.

2 Press the STANDBY/ON button on the remote control or the front panel to switch on.

When you switch on for the first time, your TV should display the Setup Navigator screen. (If the Setup Navigator doesn’t appear, you can also access it from the Initial Setup menu; see page 109).

•If this recorder is connected to a compatible TV using a fully-wired 21-pin SCART cable, the recorder will take a few seconds to download country, TV screen size and language information. (Check the manual that came with your TV for compatibility information.)

3 Use the	(cursor up/down) buttons to choose
a language, then press ENTER.
Initial Setup
Basic	Clock SetLanguage
Tuner	Input Line System
Video In/Out	On Screen Display English
Audio In	Front Panel Display français
Audio Out	Power Save	Deutsch
Language	Remote Control SetItaliano
Recording	AV Link	Español
Playback	Setup Navigator

4Press ENTER to start setting up using the Setup Navigator.

Initial Setup
Basic	Clock Set	Complete this setup before you
Tuner	Input Line System
Video In/Out		start using your recorder.
	On Screen Display
Audio In	Front Panel Display Start
Audio Out	Power Save
Language	Remote Control Set Cancel
Recording	AV Link	Please use the Initial Setup if you
		want to make more detailed settings.
Playback
	Setup Navigator

•If you don’t want to use the Setup Navigator, press (cursor down) to select Cancel, then press ENTER to exit the Setup Navigator.

5Select the Auto Channel Setting (‘Auto Scan’ or ‘Download from TV’), or ‘Do not set’, then press

ENTER.

Initial Setup
Basic	Auto Channel Setting
	Clock Set
Tuner	Input Line System
Video In/Out	On Screen Display
Audio In	Front Panel Display Auto Scan
Audio Out	Power Save	Download from TV
Language	Remote Control Set Do not set
Recording	AV Link
Playback	Setup Navigator

En