Pioneer DVR-920H Other settings you can make, Is your TV compatible with progressive scan video?

04Getting started

Set the date (day/month/year) and time, then press ENTER to make all the settings.

Initial Setup
Basic	Clock SetManual Clock Setting				2/2
Tuner	Input Line System	THU	01	01	2004
Video In/Out	Date
	On Screen Display
Audio In	Front PanelTime Display		00	00
Audio Out	Power Save		Austria
Language	Time Zone
	Remote Control Set		Vienna
Recording	AV Link
			On
Playback	Summer Time
	Setup Navigator

9Press ENTER to exit the Setup Navigator, or select ‘Go Back’ if you want to start again.

Initial Setup
Basic	Clock Set
Tuner	Input Line System
Video In/Out	Setup is complete!
	On Screen Display
Audio In	Enjoy using your DVD recorder!
	Front Panel Display	Finish Setup
Audio Out	Power Save
Language	Remote Control SetGo Back
Recording	AV Link
Playback	Setup Navigator

Use the	(cursor up/down) buttons to change
the value in the highlighted field.
Use the	(cursor left/right) buttons to move

from one field to another.

•You can go back to the previous screen at anytime in the Setup Navigator by pressing RETURN.

7Select the TV screen type, ‘Wide (16:9)’ or ‘Standard (4:3)’.

Initial Setup
Basic	Clock SetTV Screen Size
Tuner	Input Line System
Video In/Out	On Screen Display
Audio In	Front Panel Display Wide (16:9)
Audio Out	Power Save	Standard (4:3)
Language	Remote Control Set
Recording	AV Link
Playback	Setup Navigator

Use the	(cursor up/down) buttons to select, then
press ENTER.

8Is your TV compatible with progressive scan video?

Initial Setup
Basic	Clock SetProgressive
Tuner	Input Line System
Video Out	On Screen Display	Compatible
Audio In	Front Panel Display
Audio Out	Power Save	Not Compatible
Language	Remote Control Set Don't Know
Recording	AV Link
Playback	Setup Navigator

Use the (cursor up/down) buttons to select

Compatible, Not Compatible, or Don’t Know, then press ENTER.

•Note that progressive scan video is only output through the AV1(RGB)-TVconnector and the component video outputs.

That completes basic setup using the Setup Navigator.

Other settings you can make

After setting up using the Setup Navigator, you should be ready to start enjoying your DVD recorder. It’s possible, however, that you may want to make a couple of additional settings, depending on how the recorder is set up for terrestrial TV broadcasts.

•Manual channel setting – This setting lets you skip channels where there is no station, as well as manually tune to stations. See Manual CH Setting on page 110.

•Setting up the remote to control your TV – You can set up the supplied remote control to control many brands of TV. See Setting up the remote to control your TV on page 123.

28

En