Pioneer DVR-920H operating instructions Antenna

02Connecting up

Connecting an external decoder box (2)

If you only have a decoder, connect it to this recorder and your TV as shown on this page.1

Using the setup on this page you can:

• Record scrambled channels received using the recorder’s built-in TV tuner.

Important

•Do not connect this recorder ‘through’ your VCR, satellite receiver or cable box. Always connect each component directly to your TV or AV amplifier/receiver.

SCART AV
CONNECTOR
2	TV

ANTENNA

IN

1

1 Connect RF antenna cables as shown.

This enables you to watch and record TV channels.

2Use a SCART cable (not supplied) to connect the AV1(RGB)-TV AV connector to a SCART AV connector on your TV.

This enables you to watch discs.

3Use another SCART cable to connect the AV2(INPUT 1/DECODER) AV connector to a SCART AV connector on your decoder box.

This enables you to record scrambled TV channels.

AV 2 (INPUT 1/DECODER)	AV 1 (RGB) - TV	ANTENNA
	COMPONENT	IN
	VIDEO OUT

						Y
COAXIAL					IN PUT 3
AC IN						PB
						PR	IN	G-LINK
								OUT
OPTICAL	HDMI OUT	R	AUDIO	L	VIDEO	S-VIDEO	CONTROL
DIGITAL
AUDIO OUT					OUT PUT

3

1

SCART AV

CONNECTOR

	Antenna/cable TV
Decoder	wall outlet

Note

1 In order to use this setup, you will need to make the following settings from the Initial Setup menu:

•Set the AV2/L1 In setting to Decoder from the Initial Setup menu (see AV2/L1 In on page 113).

•From the Manual CH Setting screen, set the Decoder setting for the scrambled channels to On (see Manual CH Setting on page 110).

18

En