Pioneer DVR-920H Info Area, Editor Area, Changing the source and program number

05Using the GUIDE Plus+™ electronic program guide

4In the same way, enter the recording start time, followed by the GREEN Action button (Next) to confirm.

5Enter the recording end time in the same way, followed by the GREEN Action button (Next) to confirm.

6Use the number buttons to enter a channel number, then press the GREEN Action button (Next) to confirm.

Alternatively, you can press the YELLOW Action button

(Mosaic) and use thebuttons to select a channel from the mosaic, followed by ENTER.

The Info Area

This area is reserved for additional information such as news, weather reports, stock quotes, and so on, and varies by region. (Note that this feature is not available in all countries/regions.)

The Editor Area

The Editor Area is the central location for you to manage your channels. Any changes you make here will affect what is displayed in the Grid Area. The Editor Area is mainly used when setting up the GUIDE Plus+ system to make any manual changes as necessary.

You can also use the Editor Area if new channels become available in your area, or if you change from cable to satellite, say, or move house.

From the Editor Area you can:

•Display/hide channels in the grid (switch the channel on/off).

•Select a channel source (Tuner, Ext. Rec 1, Ext. Rec. 2, etc.).

•Enter a channel program number.

1 Select ‘Editor’ from the Menu bar.

2Highlight the left channel tile of the channel you want to switch on or off.

3Press the RED Action button to switch the channel on or off.

Changing the source and program number

1 Select ‘Editor’ from the Menu bar.

2Highlight the right channel tile of the channel you want to make a change to.

3Press the RED Action button to change the channel source, or the GREEN Action button to enter a program number.

Each press of the RED Action button changes the channel source (Tuner, Ext. Rec 1, etc.). To set a program number, use the number buttons to enter a program number then press ENTER. (When set to Tuner, make sure that the program number matches the preset number of this recorder for what you want to record).

Switching a channel on/off

You can choose whether or not to display a channel in the Grid Area by switching the channel on or off in the Editor Area.

48

En