Pioneer DVR-920H Front panel display shows ‘LOCK’, Picture freezes and the front, Stop working

Additional information 15

Problem	Remedy
Front panel display shows ‘LOCK’	• The Child Lock is on; turn off in order to use the recorder (page 66).
when a button is pressed
Can’t use One Touch Copy (HDD to	• Make sure that there is a recordable DVD loaded with some free space for
DVD)	recording and fewer than 99 titles already on the disc. Also make sure that for a
	Video mode disc, the disc isn’t finalized.
	• If the title currently playing contains material that is copy-once protected, One
	Touch Copy will not work.
	• One Touch Copy doesn’t work if the recorder is already recording to DVD.
Can’t use One Touch Copy (DVD to	• Make sure that there is space available on the HDD and that there are fewer than
HDD)	999 titles on the HDD.
	• One Touch Copy doesn’t work if the recorder is already recording to the HDD.
The picture freezes and the front	• Press the front panel STANDBY/ON button to switch the power off, then
panel and remote control buttons	switch back on and restart playback. If the power fails to switch off, press and hold
stop working	STANDBY/ON for 10 seconds until the power switches off.

HDMI

Problem	Remedy
The connected HDMI or DVI device	• Try disconnecting then reconnecting the HDMI cable (while the power of both
does not display any picture (and	components is on).
the front panel HDMI indicator does	• Try switching the power of the HDMI/DVI device off then back on.
not light)	• Try switching off the HDMI/DVI device and this recorder. Next, switch on the
	HDMI/DVI device and leave it for around 30 seconds, then switch on this recorder.
	• When you connect an HDMI-compatible device make sure of the following:
	– The connected device’s video input is set correctly for this unit.
	– The cable you’re using is fully HDMI-compliant. Using a non-standard cable may
	result in no picture being output.
	– Don’t use several HDMI cables connected together. Use a single cable to
	connect devices together.
	• When you connect a DVI-compatible device make sure of the following:
	– The connected device’s video input is set correctly for this unit.
	– The DVI terminal on the connected device is HDCP-compatible.
	– The connected device is compatible with 480 x 720 (NTSC) and/or 576 x 480 (PAL)
	progressive video input.
	• If the recorder’s internal HDD is damaged or broken, there will be no HDMI
	output.
	• Not all HDCP-compatible DVI devices will work with this recorder.
There’s no sound from the con-	• There is no sound when using a DVI terminal.
nected HDMI or DVI device.	• Some HDMI-compatible devices do not output sound (check with the manual
	that came with the connected device).

Note

•If the unit does not operate normally due to external effects such as static electricity, disconnect the power plug from the outlet and insert again to return to normal operating conditions.

English

127

En