Pioneer DVR-920H operating instructions Audio DRC, DRC from ‘Off‘ to ‘Max’

Models: DVR-920H

1 140
Download 140 pages 5.39 Kb
Page 106
Image 106

13The Video/Audio Adjust menu

BNR – Adjusts the amount of noise reduction (NR) applied to the block noise (artefacts visible in areas of flat color, caused by MPEG compression).

Sharpness High – Adjusts the sharpness of the high- frequency (detailed) elements in the picture.

Sharpness Mid – Adjusts the sharpness of the mid- frequency (less detailed) elements in the picture.

Detail – Adjusts how sharp edges appear.

White Level – Adjusts the intensity of white.

Black Level – Adjusts the intensity of black.

Black Setup – Corrects the standard reference black level (NTSC video only).

Gamma Correction – Adjusts the brightness of darker images.

Hue – Adjusts overall balance between red and green.

Chroma Level – Adjusts how rich the colours appear.

Chroma Delay – Adjust to correct the gap between the Y and C components in the video signal.

4 Use the (cursor left/right) buttons to adjust the currently selected picture quality setting.

5When you have all the settings as you want them, press HOME MENU to exit.

Tip

To see more of the picture as you adjust different settings, press ENTER after selecting the setting you want to adjust.

Audio DRC

• Default setting: Off

When watching Dolby Digital material at low volume, it’s easy to lose low level sounds completely—including some of the dialog. Switching on Audio DRC (Dynamic Range Control) can help by bringing up the low level sounds, while controlling high level peaks.

1During playback or when paused, press HOME MENU and select ‘Video/Audio Adjust’.

2Select ‘Audio Adjust’.

3 Use the

(cursor left/right) buttons to adjust

DRC from ‘Off‘ to ‘Max’.

 

Audio Adjust

 

 

Audio DRC

Off

Max

Exactly how much difference you can hear between the settings will depend on the material.

Remember

Audio DRC is not effective when listening to a disc via the digital output when Dolby Digital Out is set to Dolby Digital. In this case adjust the dynamic range from your AV amplifier/receiver.

106

En

Page 106
Image 106
Pioneer DVR-920H operating instructions Audio DRC, DRC from ‘Off‘ to ‘Max’