Pioneer DVR-920H operating instructions Connecting up Connecting an external decoder box

Connecting up

Connecting an external decoder box (1)

If you have an external, dedicated decoder box for your satellite or cable TV system, use the setup described on this page.

Important

•Do not connect your decoder box directly to this recorder.

•Information from the decoder (for example, relating to pay TV services), is only viewable when this recorder is off (in standby).

•For timer recording to work properly on this recorder, the VCR/satellite receiver/cable box must also be switched on during recording.

•It is not possible to watch one TV program and record another using this setup.

SCART AV
CONNECTOR
4	TV

02

English

AV 2 (INPUT 1/DECODER)		AV 1 (RGB) - TV
				COMPONENT
				VIDEO OUT
				Y
COAXIAL			IN PUT 3
AC IN				PB
				PR
OPTICAL	HDMI OUT	R AUDIO L	VIDEO	S-VIDEO
DIGITAL			OUT PUT
AUDIO OUT

	ANTENNA
	IN
IN	G-LINK
	OUT
CONTROL

	3
	2
SCART AV	SCART AV
CONNECTOR	CONNECTOR
Decoder	VCR/Satellite receiver	ANTENNA
	/Cable box
		IN

1

Antenna/cable TV wall outlet

1Connect the cable from the antenna/cable TV outlet to the antenna input on your VCR/satellite receiver/cable box.

2Use a SCART cable (not supplied) to connect your decoder to your VCR/satellite receiver/cable box. See the manual for your decoder box for more detailed instructions.

3Use a SCART cable to connect your VCR/satellite receiver/cable box to the AV2(INPUT 1/DECODER) AV connector on this recorder.

4Use a SCART cable to connect the AV1(RGB)-TV AV connector to your TV.

17

En