Pioneer DVR-920H operating instructions Guide Plus+ FAQ and troubleshooting, Setup Area, Faq

Using the GUIDE Plus+™ electronic program guide 05

The Setup Area

The Setup Area is where you can set up GUIDE Plus+ for your particular region, TV reception conditions, and so on.

Making changes to your GUIDE Plus+ setup

1 Select ‘Setup’ from the Menu bar.

2 Highlight the part you want to change.

You can change the Language, Country, Postal Code1 and the External Receiver settings.

3 Press ENTER to confirm.

GUIDE Plus+ FAQ and troubleshooting

This FAQ covers only a few questions. For a complete list please consult the GUIDE Plus+ website at: www.europe.guideplus.com

FAQ

•When I tried setting up my external receiver I could not get any of the attempts to work, what should I do?

A:There could be several reasons why your external receiver could not be controlled.

–The connections could be wrong. Make sure that the G-LINK cable is connected to the G-LINK connector on the recorder and the IR blaster is in front of the external receiver, pointing towards the IR receiver of your external receiver. See Connecting to a cable box, satellite receiver or digital terrestrial receiver on page 16.

–The code that is listed under your brand could be wrong. Please try other codes for your brand under satellite, cable or terrestrial. Go to the Setup Area and choose one of the three options (cable, satellite or terrestrial) that you have not already tried. Follow the on-screen prompts to make sure that GUIDE Plus+ can change channels on your external receiver. If it does not work, repeat the process, choosing different reception and external receiver combinations until you have tried all the codes for your brand of receiver that are already in the GUIDE Plus+ system. If it still does not work, see below on how to receive new codes overnight.

–The unit has not yet received new codes. The nightly data downloads frequently include new codes for controlling external receivers. Please tune your external receiver to your local host channel and leave it on overnight. Switch this recorder into standby. The next morning, please perform the GUIDE Plus+ setup again to see if your external receiver can now be controlled.

–The external receiver that you use is currently not supported. If, after leaving your external receiver on overnight, and doing the Reception and External Receiver Setup again, it still does not respond, please call Customer Support to report your brand and model.

English

Note

1 Making changes to the Country or Postal Code settings may require a new download of TV listings information. This can take up to 24 hours.

49

En