Pioneer DVR-920H operating instructions Playing CDs and WMA/MP3 discs, Playing Video CD/Super VCDs

04Getting started

Playing CDs and WMA/MP3 discs

The table below shows the basic playback controls for audio CDs1, and WMA/MP3 files.2

PLAY Press to start playback.

STOP Press to stop playback.

PAUSE Pauses playback, or restarts playback

when paused.

REV SCAN FWD SCAN CD and MP3 only: Press to start scanning. Press again to increase the scanning speed. (There are two scan speeds; the current scan speed is shown on-screen.)

PREV NEXT Press to skip to previous/next track (or folder for WMA/MP3 disc). (You can also use the front panel +/– buttons to do this during playback.)

During playback, enter a track number then press ENTER to skip directly to that track.

Press CLEAR to clear a number entry and

CLEAR	start again.
ENTER

Playing Video CD/Super VCDs

The table below shows the basic playback controls for Video CD/Super VCDs.

Some discs feature Playback Control (PBC for short) menus. These discs show PBC in the display when you load them and display a menu on-screen from where you

can select what to watch.3

PLAY Press to start playback.

Video CD only: If RESUME is displayed on- screen, playback starts from the place last stopped.

STOP Press to stop playback.

Video CD only: You can resume playback from the same point by pressing PLAY. (Press STOP again to cancel the resume function.)

PAUSE Pauses playback, or restarts playback

when paused.

REV SCAN FWD SCAN Press to start scanning. Press repeatedly to increase the scanning speed.

		Press to skip to previous/next track. (You
PREV	NEXT
		can also use the front panel +/– buttons to
		do this during playback.)
		When a PBC menu is displayed, press to
		display the previous/next page.
		During playback, enter a track number
		then press ENTER to skip directly to that
		track.
		Press CLEAR to clear a number entry and
	CLEAR	start again.
		While a PBC menu screen is displayed,
	ENTER	use to select numbered menu items.

		Video CD only: Each press skips backward/
BACK CM SKIP
		forward progressively up to a maximum of
		10 minutes forward or three minutes back.
		Note that this function doesn’t work when
		playing in PBC mode.
		During playback, press to start slow-
STEP/SLOW
		motion playback. Press repeatedly to
		change the playback speed.
		While paused, press to advance a single
		frame (forward direction only).
		Press to display the disc menu of a Video
	RETURN
		CD/Super VCD playing in PBC mode.

		Note
1	If you want to play a DTS audio CD, make sure the recorder is connected to a DTS-compatible amp/receiver with a digital connection. Noise
	will be output through the analog outputs. Also make sure that STEREO is selected using the AUDIO button (see Switching audio channels
	on page 58).
2	Scanning doesn’t work with WMA tracks.
3	When playing in PBC mode, some playback features, such as search, repeat and program play are not available. You can play a PBC Video
	CD/Super VCD in non-PBC mode by pressing		to start playback instead of PLAY.

36

En