Pioneer DVR-920H DVD to HDD Copy List menu options, Select ‘DVD, DVD to HDD Copy screen appears

08Copying and back-up

3 Select ‘DVD		HDD’.
The DVD to HDD Copy screen appears.
DVD to HDD Copy
Original
DVD	1	2	3	4
	DVD			1/3
Add	HDD
Erase
Move
Preview		Copy List	Total 0h00m	1/1
Erase All
Conf List
• Use the	(cursor up/down) buttons to highlight

the command you want from the menu options on the left, then press ENTER. Most commands require you then to select a title or location from the thumbnail views area of the screen. Use the (cursor left/right) followed by ENTER to do this.

• When in the thumbnails area of the screen, use the PREV ( ) and NEXT ( ) buttons to display the previous/next page if there are more titles than will fit on the screen.

•As you highlight different thumbnails, information about the title is shown in the central area of the screen. Press DISPLAY to change the information displayed.

•Press RETURN to get back to the menu options on the left from the thumbnail area of the Copy List screen.

DVD to HDD Copy List menu options

Use the following commands when making a DVD to HDD Copy List:

•Add – Select and add titles to the Copy List (see page 83).

•Move – Change the order of titles in the Copy List (see page 83).

•Erase All – Erase the Copy List (see page 84).

•Preview – Check the content of a title in the Copy List (see page 84).

•Erase – Erase individual titles from the Copy List (see page 83).

•Confirm List (Conf List) – Confirm the Copy List and go to the recording settings screen (see Recording the Copy List below).

Recording the Copy List

After putting together your Copy List, you’re ready to record it.

1Select ‘Conf List’ to display the Copy List settings screen.

2 Use the	(cursor left/right) buttons to select
the Recording Mode.
DVD to HDD Copy
Original
DVD	DVD HDD	Required 1h30m
	Recording Mode	SP
Add		Start
Erase	Copy List Total	1h30m
Move
	Current HDD Remain	30h00m

Preview	/ 34h00m
Erase All
Conf List

•High-Speed Copy – Only available when copying Original content from a VR mode disc. The Copy List is copied at the same recording quality as the original. (See page 71 for more information on high- speed copying.)

•FINE, SP, LP, EP, SLP, MN – The Copy List is copied at the specified recording quality in real-time. (Note that if you copy at a higher quality setting than the original, the copy will not be better quality than the original.)

•If you select MN above, you can also change the level setting (MN1–MN32) from the Recording Quality box that appears.

When you change the recording mode setting, you can see how much hard disk space it will require. If this is more than is available, it shows up in red and you won’t be able to start copying. In this case, either change the recording quality, or press RETURN to go back to the Copy List screen and erase one or more titles from the Copy List.

3 Select ‘Start’ to begin copying.

82

En