Pioneer DVR-920H operating instructions Connecting up Using other types of audio/video output

Connecting up

Using other types of audio/video output

If you can’t use the SCART AV connector to connect your TV to this recorder, there are standard audio/video output jacks, as well as an S-video and component video output.

02

English

Using the supplied audio/video cable

AUDIO
INPUT
VIDEO
INPUT
TV
2	1

AV 2 (INPUT 1/DECODER)	AV 1 (RGB) - TV	ANTENNA
	COMPONENT	IN
	VIDEO OUT

			IN PUT 3	Y
COAXIAL
AC IN				PB
				PR	IN	G-LINK
						OUT
OPTICAL	HDMI OUT	R AUDIO L	VIDEO	S-VIDEO	CONTROL
DIGITAL			OUT PUT
AUDIO OUT

1Connect the VIDEO OUTPUT jack to a video input on your TV.

Use the yellow jack of the supplied audio/video cable for the video connection.

2Connect the AUDIO OUTPUT jacks to the corresponding audio inputs on your TV.

Use the red and white jacks of the supplied audio/video cable for the audio connection. Make sure you match up the left and right outputs with their corresponding inputs for correct stereo sound.

Using the S-video or component video output

	COMPONENT
	VIDEO INPUT
	AUDIO
	INPUT
	S-VIDEO
2	INPUT	1
	TV

AV 2 (INPUT 1/DECODER)			AV 1 (RGB) - TV					ANTENNA
						COMPONENT		IN
						VIDEO OUT
					IN PUT 3	Y
COAXIAL
AC IN						PB
						PR	IN	G-LINK
								OUT
OPTICAL	HDMI OUT	R	AUDIO	L	VIDEO	S-VIDEO	CONTROL
DIGITAL					OUT PUT
AUDIO OUT

1Connect the S-video or component video output to a similar input on your TV.

For an S-video connection, use an S-video cable (not supplied) to connect the S-VIDEO OUTPUT jack to an S- video input on your TV

For a component video connection, use a component video cable (not supplied) to connect the COMPONENT VIDEO OUT jacks to a component video input on your TV.

See also Component Video Out on page 112 for how to set up the component video output for use with a progressive scan-compatible TV.

2Connect the AUDIO OUTPUT jacks to the corresponding audio inputs on your TV.

You can use the supplied audio/video cable, leaving the yellow video plug disconnected. Make sure you match up the left and right outputs with their corresponding inputs for correct stereo sound.

15

En