Pioneer DVR-920H operating instructions Connecting up Easy connections

02Connecting up

Easy connections

The setup described below is a basic setup that allows you to watch and record TV programs, and play discs. Other types of connections are explained starting on the following page.

Important

•These connections use SCART cables (not supplied). If your TV (or VCR) does not have a SCART connection, see the following page for connecting up using the supplied audio/video cable.

•The AV1(RGB)-TVAV connector can output ordinary (composite), S-video or RGB video, plus stereo analog audio. The AV2(INPUT 1/DECODER) connector accepts ordinary, S-video and RGB video input, as well as stereo analog audio. See AV1 Out on page 112 and AV2/L1 In on page 113 for how to set them up.

•Before making or changing any rear panel connections, make sure that all components are switched off and unplugged from the wall outlet.

SCART AV

CONNECTOR

TV

4

ANTENNA

IN

3

1	Connect the cable from the antenna/cable TV
outlet to the antenna input on your VCR.
	• If you are not connecting a VCR in the chain, connect
	it to the ANTENNA IN jack on this recorder and skip
	the next step.
2	Use an RF antenna cable (one is supplied) to
connect the antenna output of your VCR to the
ANTENNA IN of this recorder.
3	Use another RF antenna cable to connect the
ANTENNA OUT of this recorder to the antenna input

AV 2 (INPUT 1/DECODER)	AV 1 (RGB) - TV	ANTENNA
	COMPONENT	IN
	VIDEO OUT

						Y
COAXIAL					IN PUT 3
AC IN						PB
						PR	IN	G-LINK
								OUT
OPTICAL	HDMI OUT	R	AUDIO	L	VIDEO	S-VIDEO	CONTROL
DIGITAL
AUDIO OUT					OUT PUT

on your TV.

4 Use a SCART cable (not supplied) to connect the

AV1(RGB)-TV AV connector on this recorder to the

5

SCART AV

2

SCART AV connector on your TV.

5 Use another SCART cable to connect the

AV2(INPUT 1/DECODER) AV connector to a SCART AV

CONNECTOR ANTENNA

OUT

VCR	ANTENNA
	IN

1

Antenna/cable TV wall outlet

connector on your VCR.

Tip

•This recorder has a ‘through’ function which allows you to record a TV program from the built-in TV tuner in this recorder while watching a video playing on your VCR. (To use this feature when the recorder is in standby, Power Save must be set to Off—see Power Save on page 108).

14

En