Pioneer DVR-920H Selecting the hard disk or DVD for playback and recording, Press Guide

Getting started 04

Checking the downloaded data the following day

1 Press GUIDE.

You should see a grid filled with channel logos and TV

listings information. Use the (cursor up/down) buttons to review the list. If you notice that there are channels missing, or that there are channels in the list that you don’t get, go to the Editor screen:

• Press	(cursor up) repeatedly until the Menu bar is
highlighted.
• Press	(cursor right) until Editor is highlighted. The

main area of the screen now shows a list of channels. Those that are turned ON are displayed in the grid; those that are OFF are hidden. Use the

(cursor) buttons to move down the list and turn channels ON or OFF as necessary.

•For any channel that you turn ON, the GUIDE Plus+ system will need to know how it is received (the source) and on which program number. The source may be the built-in tuner of this recorder, or an external receiver. The program number is the number on which the channel can be found on its receiving device/source. The entry in the Editor screen must match this number for correct recording of that channel.

•The above is especially important for the ‘host channel’. Please make sure that the host channel is always switched ON.

2Use the number buttons to change the program numbers as you like.

3When you’re done, press the BLUE Action button (Home) to get back to the GUIDE Plus+ home screen.

•You can find detailed information on using the GUIDE Plus+ system in the next chapter, Using the GUIDE Plus+™ electronic program guide on page 40.

Selecting the hard disk or DVD for playback and recording

The HDD and DVD buttons (remote control and front panel) are used to select the hard disk (HDD) or DVD for playback and recording. The indicator in the front panel display shows which is currently selected.

HDD DVD

English

31

En