Pioneer DVR-920H Initial Setup menu, Input Line System, Front Panel Display, Power Save

14The Initial Setup menu

Set the date (day/month/year) and time, then press ENTER to make all the settings.

Initial Setup
Basic	Clock SettiManualg Clock Setting				2/2
Tuner	Input Line System	THU	01	01	2004
Video In/Out	Date
	On Screen Display
Audio In	Front PanelTime Display		00	00
Audio Out	Power Save		England
Language	Time Zone
	Remote Control Set		London
Recording	Setup Navigator
			On
Playback	Summer Time

Use the	(cursor up/down) buttons to change
the value in the highlighted field.
Use the	(cursor left/right) buttons to move

from one field to another.

Input Line System

• Default setting: 625System

Initial Setup
Basic	Clock Setting	525System
Tuner	Input Line System	625System
Video In/Out	On Screen Display
Audio In	Front Panel Display
Audio Out	Power Save
Language	Remote Control Mode
Recording	AV Link
Playback	Setup Navigator

Front Panel Display

• Default setting: On

Initial Setup
Basic	Clock Setting	On
Tuner	Input Line System	Off
Video In/Out	On Screen Display
Audio In	Front Panel Display
Audio Out	Power Save
Language	Remote Control Mode
Recording	AV Link
Playback	Setup Navigator

On the default setting, the time is shown in the front panel display when the recorder is in standby. Switch to Off to have the front panel display switch off completely

when in standby.2

Power Save

• Default setting: Off

Initial Setup
Basic	Clock Setting	Mode1
Tuner	Input Line System	Mode2
Video In/Out	On Screen Display	Off
Audio In	Front Panel Display
Audio Out	Power Save
Language	Remote Control Mode
Recording	AV Link
Playback	Setup Navigator

For standard PAL or SECAM recording, leave the input line system to 625System. When recording an NTSC or PAL–60 signal through an external input, change to

525System.1

When set to Off, signals arriving at the ANTENNA IN terminal and at the AV2(INPUT 1/DECODER) AV connector are passed through to the ANTENNA OUT terminal and to the AV1(RGB)-TVAV connector, respectively, when the recorder is in standby.

On Screen Display

• Default setting: On

Initial Setup
Basic	Clock Setting	On
Tuner	Input Line System	Off
Video In/Out	On Screen Display
Audio In	Front Panel Display
Audio Out	Power Save
Language	Remote Control Mode
Recording	AV Link
Playback	Setup Navigator

On the default setting, the recorder shows on-screen operation displays (Play, Stop and so on). Change to Off to hide these displays.

You can cut the standby power consumption of the recorder by turning off the through function for one or

both terminals3:

•Mode1 – Through function only for the antenna terminal

•Mode2 – No through function

•Off – Through function for both antenna terminal and AV connector

Note

1• When the current input is a built-in tuner channel preset, changing the input line system will usually also affect the input line system of the AV2(INPUT 1/DECODER) input. However if the AV2/L1 In setting is set to Decoder (see AV2/L1 In on page 113), then the L2 input is affected instead.

• If, when this setting is changed, the screen goes blank (due to incompatibility with your TV), you can switch back by pressing and holding the front panel button then pressing STOP REC (also front panel) while the recorder is stopped.

•When you switch the Input Line System setting the Copy List is erased.

•You can’t mix recordings of different TV line systems on the same disc.

•When you change this setting, the Input Colour System setting also changes (see Input Colour System on page 111). 2 When set to Off, the display still lights dimly in standby when setting a timer recording.

3 When a timer recording is set with VPS/PDC on, SCART through is always active.

108

En