Pioneer DVR-920H Video/Audio Adjust menu Chapter, Choosing a preset, Creating your own set

13The Video/Audio Adjust menu

Chapter 13

The Video/Audio Adjust menu

Using the Video/Audio Adjust menu you can set up the picture quality for the built-in tuner and external inputs, for disc playback, and for recording.

Setting the picture quality for TV and external inputs

Picture Creation lets you choose a set of picture quality settings for the built-in TV tuner and for each external input. There are several preset settings that suit various sources, or you can create up to three of your own sets.

Choosing a preset

1With the recorder stopped, press HOME MENU and select ‘Video/Audio Adjust’.

Creating your own set

There are three user presets in which you can save your own set of picture quality settings.

1Follow Choosing a preset above and select one of the user presets (Memory 1, 2 or 3).

2Select ‘Detailed Settings’.

	Pr 5
	Memory1
	Detailed Settings
3 Use the	(cursor up/down) buttons to select

the picture quality setting you want to adjust.

GUIDE Plus+	Disc Setup
Disc Navigator	Initial Setup
Copy	Video/Audio Adjust
Easy Timer	Play Mode
Disc History	PhotoViewer

2 Select ‘Video Adjust’.

Memory1
Prog. Motion	Fast
PureCinema	Auto
Subtitle Adjust	On
3-D Y/C	Motion
YNR	Off
CNR	Off
Detail	Off

Pr 5

Slow

Still

Max

Max

Max

3 Use the (cursor left/right) buttons to

change the preset.

Pr 5

Tuner

Detailed Settings

•Use the INPUT SELECT button to switch between the built-in TV tuner and the external inputs.

•Use the CHANNEL +/– buttons to change the channel of the built-in TV tuner.

There are six presets available:

•Tuner – suitable for general TV broadcasts

•VCR – suitable for video cassettes

•LDP – suitable for Laserdiscs

•Memory1 – user preset 1

•Memory2 – user preset 2

•Memory3 – user preset 3

You can press DISPLAY to see the individual settings for the current preset.

4 Press ENTER to select the preset.

You can adjust the following settings:

•Prog. Motion – Adjusts the motion and still picture quality when video output is set to progressive.

•PureCinema – This setting optimizes the picture for film material when the video output is set to progressive scan. Usually this is best left set to Auto; try switching to Off if the picture appears unnatural.

•Subtitle Adjust – When the video output is set to progressive scan, it’s possible that the subtitles in some movies will disappear unnaturally. In this case select the On setting.

•3-D Y/C – Adjusts the brightness/colour separation (NTSC video only).

•YNR – Adjusts the amount of noise reduction (NR) applied to the Y (brightness) component.

•CNR – Adjusts the amount of noise reduction (NR) applied to the C (colour) component.

•Detail – Adjusts how sharp edges appear.

•White AGC – Turn on for automatic white level adjustment.

104

En