HP 7210v manual Set up your HP All-in-One to a computer with one phone port

Chapter 10

There are two different ways to set up your HP All-in-One with your computer based on the number of phone ports on your computer. Before you begin, check your computer to see if it has one or two phone ports:

●If your computer has only one phone port, see the next section, Set up your HP All-in-One to a computer with one phone port. You will need to purchase a parallel splitter (also called a coupler), as shown below. (A parallel splitter has one RJ-11 port on the front and two RJ-11 ports on the back. Do not use a 2-line phone splitter, a serial splitter, or a parallel splitter which has two RJ-11 ports on the front and a plug on the back.)

Fax setup

Example of a parallel splitter

●If your computer has two phone ports, see Set up your HP All-in-One to a computer with two phone ports.

Set up your HP All-in-One to a computer with one phone port

This section describes how to set up your HP All-in-One with a computer modem if your computer has only one phone port.

Back view of the HP All-in-One

1 Telephone wall jack

2 Phone cord connected to the "2-EXT" port

3 Parallel splitter

4 Telephone

5 Computer with modem

6 Phone cord supplied in the box with your HP All-in-One connected to the "1-LINE" port

To set up your HP All-in-One to a computer with one phone port

1.Find the phone cord that connects from the back of your computer (your computer modem) to a telephone wall jack. Disconnect the cord from the

98 HP Officejet 7200 All-in-One series