Chapter 16

Figure 3

5.Keep your fingers in the notch as you lower the lid back down until the lid is almost closed.

6.Push against the top of the face plate (1) with your thumb as you pull the bottom away from the right side of the HP All-in-One with your fingers, as shown in Figure 4.

Use a slight twisting motion to help release the face plate on the right side.

Figure 4

1 Face plate

7.As shown in Figure 5, slide the face plate left (1) until the plastic catch on the left side is not touching any part of the HP All-in-One, then pull the face plate away from the device (2).

Troubleshooting information

196

HP Officejet 7200 All-in-One series