Troubleshooting information
Chapter 16
3.When your language is selected, press OK.
4.When prompted, press 1 for Yes or 2 for No.
The countries/regions for the selected language appear. Press to scroll through the list.
5.Use the keypad to enter the
6.When prompted, press 1 for Yes or 2 for No.
Print a
1.Press Setup.
2.Press 2, and then press 6.
This selects Print Report, and then selects
The wrong measurements are showing in menus on the control panel display
Solution You might have selected the incorrect country/region when setting up your HP
To change the country/region, you must first set the default language again. You can change these settings at any time by using the following procedure:
1.Press Setup.
2.Press 7, and then press 1.
This selects Preferences, and then selects Set Language & Country/Region. A list of languages appears. You can scroll through the list of languages by pressing .
3.When your language is selected, press OK.
4.When prompted, press 1 for Yes or 2 for No.
The countries/regions for the selected language appear. Press to scroll through the list.
5.Use the keypad to enter the
6.When prompted, press 1 for Yes or 2 for No.
Print a
1.Press Setup.
2.Press 2, and then press 6.
This selects Print Report, and then selects
I received a message on the control panel display to align the print cartridges
Solution The HP
Note If you remove and reinstall the same print cartridge, the HP
One will not prompt you to align the print cartridges. The HP
172 | HP Officejet 7200 |