Basic Operation
ON/OFF Switch
OFF ON
With the UPS plugged in and equipment connected, place this switch in the ON position to enable battery backup. When the switch is placed in the OFF position, the UPS battery will recharge and AC power will be present at the UPS outlets, but the UPS will NOT provide battery backup power to connected equipment in the event of a blackout or severe brownout.
Indicator Lights
All Indicator Light descriptions apply when the UPS is plugged into an AC outlet and turned on.
LINE POWER: This green light will illuminate whenever the UPS is ON and receiving normal AC line power.
BATTERY POWER: This red light will illuminate when the UPS is providing equipment with battery power.
Other UPS Features
AC Receptacles: “UPS/Surge” receptacles are used to provide connected equipment with AC line power during normal operation and battery power during blackouts and brownouts. They also protect equipment against damaging surges and line noise.
Battery Replacement Door: Under normal conditions, the original battery in the UPS will last several years. Battery replacement should be performed only by qualified service personnel. Refer to “Battery Warnings” in the Safety section. Should the UPS require battery replacement, visit Tripp Lite on the Web at www.tripplite.com/support/ battery/index.cfm to locate the specific replacement battery for the UPS.
4
