Load originals and load paper

Chapter 5

Paper

Tips

 

 

 

HP papers

●

HP Premium Paper: Locate the gray arrow on the nonprinting side

 

 

of the paper, and then slide the paper into the input tray with the

 

 

arrow side facing up.

 

●

HP Premium Inkjet Transparency Film: Insert the film so that the

 

 

white transparency strip (with arrows and the HP logo) is on top

 

 

and is going into the input tray first.

 

 

Note The HP All-in-One might not automatically detect

 

 

transparency film if it is loaded incorrectly, or if you use

 

 

transparency film other than HP transparency film. For best

 

 

results, set the paper type to transparency film before printing or

 

 

copying onto transparency film.

 

●

HP Iron-On Transfers: Flatten the transfer sheet completely before

 

 

using it; do not load curled sheets. (To prevent curling, keep

 

 

transfer sheets sealed in the original package until you are ready

 

 

to use them.) Locate the blue stripe on the nonprinting side of the

 

 

transfer paper and then manually feed one sheet at a time into the

 

 

input tray with the blue stripe facing up.

 

●

HP Greeting Cards, HP Photo Greeting Cards, or HP Textured

 

 

Greeting Cards: Insert a small stack of HP greeting card paper into

 

 

the input tray with the print side down; slide the stack of cards

 

 

forward until it stops.

 

 

Labels

Always use letter or A4 label sheets designed for use with HP inkjet

(for printing from a

devices (such as Avery inkjet labels), and make sure that the labels are

no more than two years old. Labels on older sheets might peel off

software application

when the paper is pulled through the HP All-in-One, causing paper jams.

only)

1.

Fan the stack of labels to make sure none of the pages are

 

 

 

sticking together.

 

2.

Place a stack of label sheets on top of full-size plain paper in the

 

 

input tray, label side down. Do not insert labels one sheet at a time.

 

 

Continuous banner

Continuous banner paper is also known as computer or z-fold paper.

paper

1.

Remove the output tray.

(for printing from a

2.

Remove all paper from the input tray.

software application

 

Note Leave the output tray off of the HP All-in-One while the

only)

 

 

banner prints to prevent the continuous banner paper from tearing.

 

 

 

3.

Verify that the stack of banner paper contains at least five pages in

 

 

the stack.

 

 

Note If you use non-HP banner paper, make sure you use 20-lb.

 

 

paper.

 

4.

Carefully tear off the perforated edge strips from both sides of the

 

 

paper stack, if any, and unfold and refold the paper to make sure

 

 

the pages do not stick together.

 

 

 

40

HP Officejet 7200 All-in-One series