Use the copy features
Chapter 7
Refer to the following table to determine which paper size to choose based on the paper loaded in the input tray.
Paper type | Suggested paper size settings |
|
|
Copier, | Letter or A4 |
|
|
Inkjet papers | Letter or A4 |
|
|
Letter or A4 | |
|
|
Letterhead | Letter or A4 |
|
|
Photo papers | 10 x 15 cm or 10 x 15 cm Borderless |
| 13 x 18 cm or 13 x 18 cm Borderless |
| 4 x 6 inches or 4 x 6 Borderless |
| 5 x 7 inches or 5 x 7 Borderless |
| Letter or Letter Borderless |
| A4 or A4 Borderless |
| |
|
|
Hagaki cards | Hagaki or Hagaki Borderless (Japan |
| only) |
|
|
Transparency films | Letter or A4 |
|
|
Set the copy paper type
You can set the paper type on your HP
If you copy onto special papers, or if you experience poor print quality by using the Automatic setting, you can set the paper type manually from the Copy menu.
1.Make sure you have paper loaded in the input tray.
2.Load your original face down on the right front corner of the glass or face up in the document feeder tray.
If you use the document feeder tray, place the page so that the top of the document is inserted first.
3.In the Copy area, press Menu until Copy Paper Type appears.
4.Press 
to select a paper type setting, and then press OK.
5.Press Start Copy Black or Start Copy Color.
Refer to the following table to determine which paper type setting to choose based on the paper loaded in the input tray.
Paper type | Control panel setting |
|
|
Copier paper or letterhead | Plain Paper |
|
|
HP Bright White Paper | Plain Paper |
|
|
54 | HP Officejet 7200 |