HP 4500 DN Processing JOB, Ready, Reinstall, Transfer Belt, Remove Paper, TOP Output BIN, Memory

Printer Control Panel Messages (continued)

Message	Description	Recommended Action
PROCESSING JOB	The printer is processing the current	No action required.
	job.
READY	The printer is online and ready to	No action required.
	receive data, and no status or
	device attendance messages are
	pending.
REINSTALL	The transfer belt is broken or	Inspect the transfer belt and
TRANSFER BELT	incorrectly installed.	replace it if necessary.
REMOVE PAPER	The top output bin is full.	Remove media from the top
TOP OUTPUT BIN		output bin.
RESETTING	The printer is executing a memory	No action required.
MEMORY	reset. The printer returns to the
	READY state upon completion of
	this process.
RESETTING VALUES	The color calibration density values	No action required.
FINISHED	have been reset to their default
	values.
RESTORING	The printer is executing a	No action required.
FACTORY SETTINGS	RESTORE FACTORY SETTINGS
	or a COLD RESET.
TONER CMYK LOW	The toner cartridge specified is low	Printing will continue until a
	on toner.	TONER OUT message
		appears. To change the toner
		cartridge now, press SELECT.
TONER CMYK OUT	The toner cartridge specified is out	Change the specified toner
	of toner.	cartridge now to ensure print
		quality.
TONER CMYK LOW	The toner cartridge specified is low	Press SELECT to enter the toner
alternates with	on toner and must be replaced now.	replacement menu.
PRESS SELECT
TO CHANGE TONER
TONER CMYK OUT	The toner cartridge specified is out	Press SELECT to enter the toner
alternates with	of toner. If the TONER OUT setting	replacement menu. Press GO
PRESS SELECT	in the CONFIGURATION MENU is	to resume printing without
TO CHANGE TONER	set to OVERRIDE, pressing GO will	changing the cartridge.
	resume printing.

126 Printer Control Panel Messages EN