HP 4500 DN Adjusting Color Balance, To adjust color balance, Print a color balance calibration

Adjusting Color Balance

This printer features automatic color calibration to provide high-quality color output. In situations that require critical color control, you can manually adjust the density balance of the printer’s four toner colors.

CAUTION This procedure should only be performed by your network administrator. Performing this procedure changes the color balance of the printer by altering halftones and affects all print jobs.

Note

To adjust color balance

Step 1: Print a color balance calibration page.

The color balance calibration page displays current color settings and provides a record of the printer’s initial settings before any adjustments are made.

1Press MENU until CALIBRATION MENU displays.

2Press ITEM until PRINT CALIBRATION PAGE displays.

3Press SELECT to print the color balance calibration page. The page consists of four color bars (cyan, magenta, yellow, and black) and a box containing gray balance circles (see figure 4-1). The factory default setting for each color is zero. The range of settings is -5 to +5.

Adjusting densities using the four color bars provides coarse color balance adjustments. After making these adjustments, you can fine- tune color densities by adjusting the gray balance. (See step 7 for instructions.)

EN Chapter 4 79