HP 4500 DN manual Configuration Menu, Menu Item Values Description

Configuration Menu

The Configuration Menu is used to set general printer default settings.

CAUTION Hewlett-Packard recommends that configuration settings only be changed by a system administrator. Configuration settings seldom need to be changed.

Menu Item	Values	Description
POWERSAVE	OFF	The length of time before the
	1 MIN (used for	printer goes into power-saving
	troubleshooting)	mode.
	30 MIN
	1 HR*
	2 HRS
	4 HRS
	8 HRS
PERSONALITY	AUTO*	The personality (language) the
	PCL	printer uses to process a print job.
	PS
CLEARABLE	JOB*	If ON, message is displayed until
WARNINGS	ON	GO is pressed. If JOB, message is
		displayed until end of print job.
AUTO CONTINUE	ON*	Determines whether the printer
	OFF	continues printing when certain
		errors occur. If ON, printer returns
		to the READY state. If OFF, printer
		remains offline until GO is pressed.
TONER LOW	CONTINUE*	Determines whether the printer
	STOP	continues or stops printing when a
		TONER LOW condition is
		detected.
TONER OUT	STOP*	Determines whether the printer
	OVERRIDE	continues printing when GO is
		pressed after a TONER OUT
		condition is detected.
JAM RECOVERY	OFF*	Printer attempts to recover from
	ON	jams and reprints affected pages.
PRINT PS ERRORS	OFF*	Prints out an error page when
	ON	emulated PostScript errors occur.

*Denotes default setting

EN Chapter 2 35