HP 4500 DN manual Initializing, Drum KIT, Install Tray, Memory Full, Stored Data Lost, Changed

Printer Control Panel Messages (continued)

Message	Description	Recommended Action
INITIALIZING	This message is displayed when the	No action required.
	printer is initially turned on.
INSTALL	The drum kit is not installed or is	Verify that the drum kit is
DRUM KIT	incorrectly installed.	correctly installed.
INSTALL TRAY 2	Tray 2 is not installed or is not	Verify that Tray 2 is completely
	completely closed, preventing	closed.
	media from being printed from
	Tray 3.
MEMORY FULL	The printer has no available	Try printing simplified pages. If
STORED DATA LOST	memory. The current job may not	this does not resolve the
	print correctly. Some downloaded	problem, add printer memory.
	fonts may have been deleted.
MEMORY SETTINGS	The I/O buffering settings were	No action required. Adding
CHANGED	changed by the printer because	printer memory may prevent
	there is not enough memory	this from occurring.
	available to use the previous
	settings.
MEMORY SHORTAGE	The available memory was not	Adding printer memory may
JOB CLEARED	enough to continue printing. The	prevent this from occurring.
	remainder of the job was canceled.
MEMORY SHORTAGE	The image was too large for	Adding printer memory may
PAGE SIMPLIFIED	available printer memory. Therefore,	prevent this from occurring.
	the printer compressed the image,
	resulting in lost data.
NO JOB TO CANCEL	CANCEL JOB was pressed but there	No action required.
	is no active job or buffered data to
	cancel. The printer automatically
	returns to the READY state.
OFFLINE	The printer is offline and there are	Press GO to return the printer
	no error messages pending.	to the READY state.

124 Printer Control Panel Messages EN