HP 4500 DN manual EIO Menu

I/O Menu

The I/O Menu allows you to make changes to printer interface settings. The following table lists the selections that appear for each item in this menu. (See chapter 6 for additional information.)

Menu Item	Values	Description
I/O TIMEOUT	5 to 300 SECONDS	Amount of time the printer waits to
	(default: 15)	receive data before switching to
		another port.
I/O BUFFER	AUTO*	Allocates memory to I/O ports.
	OFF
	ON
I/O BUFFER SIZE1	nnnnnnK	Amount of memory allocated to the
	(default: 100K)	I/O ports.
PARALLEL HIGH	YES*	Allows faster parallel
SPEED	NO	communications supported by
		newer computers.
PARALLEL	ON*	Turns bidirectional parallel
ADV FUNCTIONS	OFF	communication on and off.

*Denotes default setting

1Only appears if I/O BUFFER is ON

EIO Menu

If an Enhanced Input Output (EIO) card (for example, an HP JetDirect Print Server) has been installed in the printer, an additional menu is available. This additional menu provides a way to configure the EIO accessory and to adjust network interface settings. For information on HP JetDirect EIO menus, see the HP JetDirect Print Server Software Installation Guide. This guide is included with the HP Color LaserJet 4500 N and 4500 DN printers and is also available through HP Direct. (For ordering information, see Appendix D.)

EN Chapter 2 37