HP 4500 DN manual Enii, Ensnap

To configure the Novell NetWare parameters from the printer control panel

1Press MENU until HP EIO 1 MENU displays.

2Press ITEM until CFG NETWORK=NO * displays.

3Press VALUE until CFG NETWORK=YES displays.

4Press SELECT once. CFG NETWORK=YES * displays.

5Press ITEM until CFG NOVELL=NO * displays.

6Press VALUE until CFG NOVELL=YES displays.

7Press SELECT once. CFG NOVELL=YES * displays.

8Press ITEM until FRAME=AUTO * displays.

9To configure the Novell NetWare protocol, press VALUE to select one of the frame types from the following table:

Frame Type	Description
AUTO (default)	All listed Novell frame types will be allowed.
EN_8023	Limits frame types to IPX over IEEE 802.3 frames.
	All others will be counted and discarded.
EN_II	Limit frame types to IPX over Ethernet II frames.
	All others will be counted and discarded.
EN_8022	Limit frame types to IPX over IEEE 802.2 with
	Ethernet frames. All others will be counted and
	discarded.
EN_SNAP	Limit frame types to IPX over SNAP with Ethernet
	frames. All others will be counted and discarded.

10Press SELECT to save the value. An asterisk (*) displays.

11If you are finished, press GO to return the printer to the READY state.

– OR –

See the appropriate sections for other protocols that will be used.

EN Chapter 6 105